Audi A3 and Audi A4, each have stylish and aggressively styled entrance and rear bumpers, this removing procedures additionally straightforward to do it your self. It prices much less and extra time-environment friendly to take away the bumpers and exchange with new bumpers than restore them when they’re broken. The bumpers should additionally get replaced when including a physique package or modifying the Audi with aftermarket bumpers. Instruments you want if you do that removing procedures : jack, jack stands, T30 Torx screwdriver, T25 Torx screwdriver, Ratchet wrench set, and Allen wrench set.
Audi A3
Audi A3/Audi A4 Entrance Bumper Removing Procedures
1. Raise the entrance of the Audi, utilizing a jack, to get the entrance wheels off the bottom. Then Help the automotive on jack stands.
2. Open the hood of the Audi A3 and above the grille, use the T30 Torx screwdriver to unscrew (counterclockwise) the three T30 Torx screws situated on the prime fringe of the entrance bumper. On the Audi A4, take away each T25 Torx screws, situated on prime of each headlights, and with a T25 Torx screwdriver loosen each screws discovered on each side of the headlights. Gently pull out the headlights and press the metallic clips behind the headlights to disconnect the wiring.
three. Utilizing the ratchet wrench take away the three nuts situated at each entrance fenders of the Audi A4. Gently pull out each decrease grilles situated on the fog lights and loosen each bolts there however don’t take away them, utilizing an Allen Wrench.
four. On the Audi A4 take away the 4 T25 Torx screws situated on the fringe of each entrance wheel arches, with one screw situated beneath every arch liner, and pull out the arch liners, two skinny plastic items situated above the entrance wheels.
5. Take away the bolts situated beneath the headlights of the Audi. Take away the 2 bolts on the inside the entrance bumper, utilizing a ratchet wrench situated beneath each headlights of the Audi A3 .
6. Take away the seven T25 Torx screws situated on the backside fringe of the entrance bumper of the Audi A3.
7. On the driving force’s aspect, unplug the wiring and tubing situated contained in the entrance bumper to disconnect them from the fog lights, horn, and the left headlight washer. Disconnect the suitable headlight washer tube, situated on the passenger’s aspect of the entrance bumper.
eight. Gently pull and take away the entrance bumper of the Audi.
Audi A3/Audi A4 Rear Bumper Removing Procedures
1. Open the trunk to tug and take away each trunk liners, situated at both aspect of the trunk, then take away the 5 nuts situated at each side of the rear bumper utilizing a ratchet wrench.
2. Take away the three bolts situated on the fringe of each rear wheel arches. Pull out the rear arch liners and take away the 2 T25 Torx screws situated at both sides of the wheel arches.
three. Lay down on the bottom and, from beneath, take away each T25 Torx screws, situated on the backside fringe of the rear bumper.
four. Pull gently to take away the rear bumper of the Audi.
5. Reverse the steps to exchange each entrance and rear bumpers with new ones.
